search

top

Bosch Jobsite Stereo CD 179.99
Bosch Power Box More than MusicA serious jobsite radio that charges batteries & gives you extra outletsCD player with anti skip technology & MP3 and CD R/RW compatible
Bosch claims its weatherproof Power Box radio is durable enough for a construction site, so we threw it across Boschs Booth at a recent tradeshow. Not only did it survive, the CD didnt even skip. This isnt the first job site radio but its the first to really impress us. Why? A steel and rubber frame protects the ruggedized shell, which houses four ground fault circuit interrupter (GFCI) protected outlets for power tools. The outlets cut power if water leaks in, so you wont get fried. Theres also a slot in the back to charge the batteries for your cordless power tools; when you find yourself away from an outlet the radio can run off those same batteries. The radio also includes a mini plug input for your MP3 player and a 12V DC outlet to recharge your cell phone. Quick word to the wise: if you plan to replicate our drop and roll test, we suggest unplugging all those accessories first!
Jenny Everett (Popular Science 2004)
read more:

Canvas Tool Bag 22.25
Canvas Tool Bag
Features & Benefits:
Big enough to hold and keep all your necessary tools.
Internal metal frame holds bag wide open.
10 Outside pockets to organizes tools.
14 Inside pockets for accessories.
Built of rugged 20oz. canvas material with hard bottom for better stability.
12 inch Long x 10 inch Wide x 11 inch Height
read more:

Mini Hex Set 24.95
8 Piece Mini Hex Set
Designed to aid the technician with work on hex nuts and bolts for Dasboards, Radios, ECU, Instrument panels, etc.
This is a nice set for removal and replacement of small Hex (Allen) Fasteners
Quick Open End application and interchange.
Adustable length for hard to reach areas.
Comes in the plastic container.
Tool in assembled position adusts from a minimum 5.5 inch to a maximum 9.0 inch overall.
Hex sizes are: 3mm, 3.5, 4, 4.5, 5, 5.5 and 6mm.
read more:

Stainless Steel Tool Box 44.95
20 inch Stainless Steel
Tool Box with recessed comfort handle.
Heavy duty box with removable inner tray
and strong double latch with padlock eyehole.
(tools not included).
read more:

Terminal Tool Wire Remover 13.99
Special Electrical Tools Terminal Tool Eliminate Damaged wires and Terminals.
Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals. See set of 2 below.
read more:

46mm Axle Nut Removal Tool 00
Axle Nut Removal Tool 46mm
read more:

Axle Nut Removal Tool 00
Axle Nut Removal Tool 36mm
read more:

Special Crowsfoot Socket 22.50
OXYGEN SENSOR Socket 4491b This is a Special 22mm Crowsfoot Socket with 3/8 Drive Used for the removal and replacement of Oxygen Sensor that are situated within a confined area.No need to snip the wires leading to the unit when all you want to do is check the sensor.Applicable: Most European Models.
read more:

Flexible Driver Set 4 29.95
You will receive 4 all four tools with this set. Included are 3 flex shaft (female) nut drivers 6, 7, and 8mm
Plus a very handy 1/4 inch (male) Driver.

read more:

Honda Acura Bushing Tool Kit 189.00
Honda Acura Bushing Removal and Installation Tool easily and quickly removes and install trailing arm bushing in 15 minutes per side versus the factory "book" time of 1.8 hours per side. No removing the arm from the vihicle and using a hydraulic press. No need to disconnect brake parts such as calipers, rotors, shoes, lines or brake cables.
Works on Civic 1988 2000, CRX 1988 1991, Del Sol 1993 1997
Acura Integra 1994 2001

read more:

Honda Pulley Holding Tool 59.50
This tool is used for removal and installation of the crank bolt on most Honda and Acura engines. In operation with the use of a 1/2" breaker bar or ratchet this tool holds the harmonic damper pulley from rotating when removing the pulley bolt. There is a hole in the center of the tool to allow the use of a socket and extension to break loose or tighten the pulley bolt.Applications Accord 2.2L 4 cylinder 90 97; 2.7L 6 cylinder 96 97; 2.3L 4 cylinder 98 & later; 3.0L V 6 98 & later. Civic 1.6L 4 cylinder 92 & later. CRV 2.0L 4 cylinder 97 & later. Del Sol 1.6L 4 cylinder 93 97. Insight 1.0L 3 cylinder all. Odyssey 2.2L 4 cylinder 95 97; 2.3L 4 cylinder 98; 3.5L V 6 99 & later. Prelude 2.2L 4 cylinder 92 & later; 2.3L 4 cylinder 92 96 S2000 2.0L 4 cylinder all. ACURA CL 2.2L 4 cylinder 97; 3.0L V 6 97 & later; 2.3L 4 cylinder 98 & later. Integra 1.6L 4 cylinder 90 92 1.7L 4 cylinder 93 & later 1.8L 4 cylinder 94 & later. Legend 3.2L V 6 91 95. NSX 3.0L V 6 91 & later 3.2L V 6 98 & later. RL 3.5L V 6 96 & later. TL 3.2L V 6 95 & later.

read more:

Hose Clamp Plier RB003 35.00
Read what some TDI People say about this tool:The clamp works fine on theMAF clamps & ones a little larger alsoand it has a locking ratcheting action as you tightenDEFINITELY shop quality!These hose clamp pliers are simply fantastic.Other types of hand type hose clamp pliers and they have a tendency to slip off.These will not!This Hose Clamp Plier is a Must for TDI People.Features & Benefits: Double line, allows for extra reach,removal and locking of clamps into open position, allows for removal of plastic and/or metal self tightening hose clamps with diameters of 11/16" 2 1/2" (18mm 54mm), precision clamp on end of flexible cable allows for extended reach where other models cannot reach,Pliers can be locked, freeing up your hands and making your job easy.Hose Clamp Pliers NUMBER P RB003

read more:

Long Thin Wrench Set 2 24.99
"Long" Pattern Thin Wrenches
Set of Two (2)
One of each size: 36MM and 32mm
Brand New "Long Thin Wrenches"
Many applications for these two tools,
especially for European cars.
Overall length of 15 inches.
Thickness of each wrench is 1/4" (6.35mm)
Some applications include:Mercedes and BMW R&R of fan clutch hub nut.
Porsche 32mm used for R&R of tie rods Model 911 Turbo, 89 76
36mm Needed for proper adjustment of rear ride height 911 , 89 77 etc...

read more:

Metric Wrench 4 Piece Set 62.50
Spanner Wrench Set needed for R&RThis 4 pack set includes (1) each of the following wrench sizes:27mm, 30mm, 32mm, 36mm. Some pplications include: Porsche models 911, 930, 914 6, 944, 968. This is a German Car Specail * This set is great for the European Automotive Technician. Very Handy Tools!

read more:

Mini Uni Drive Set 23.50
8 Piece Set was designed to aid the technician with work on hex nuts and bolts for Dasboards, Radios, ECU, Instrument panels, etc.
This is a nice set for removal and replacement of small Hex (Allen) Fasteners
Quick Open End application and interchange.
Adustable length for hard to reach areas.
Comes in the plastic container.
Tool in assembled position adusts from a minimum 5.5 inch to a maximum 9.0 inch overall.
Hex sizes are: 3mm, 3.5, 4, 4.5, 5, 5.5 and 6mm.

read more:

Nissan Valve Tools 27.99
For overhead camshaft engines using spacer shims.
This unique tool has been designed to allow for easy valve adjustement on all NISSANS, and many other overhead camshaft engines using spacer shims for valveadjustment in operation.

read more:

Panel Popper Set of 5 19.50
DOOR PANEL &UPHOLSTERY TOOLSComplete Panel "Popper" Tool Set
Super Tools for Auto Interior Work
This 5 Piece Set of plastic pry pullersis perfect for working on those expensive panels on car interiors.It will also help work loose plastic decorative inserts, door moldingsand countless other pieces on todays modern and many vintage cars.
*You may have seen other sets like this, but they only come with 4 pieces...This set has 5 pieces with more features plusthe quality of this set is better (stronger and more durable) than other being sold,
making this a much better deal.
This set comes in a Clam Shell Protective Container.

read more:

Set 2 Tie Rod Tools 89.00
Set of 2 Pullers including:
Large Tie Rod Tool VW 1014 Separator used for disassembly of pitman arm type tie rod ends without tearing the ball joint boots. Opening size is 25mm. Most VW Audi & Late Porsche models.

PLUS *

Puller P266HX Separator used for disassembly of Pitman arm type tie rod ends without tearing the boots. Opening size is 18mm. Most VW Audi Late Porsche models.

read more:

Special Open Socket 22mm 25.00
On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action: 

read more:

Toyota Bonus Set 37.99

ZDMAK SPECIAL DEAL
Headbolt tool and Valve tools...
First Item: Valve tool designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe. In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness. Works especially well with 3S FE and 3S GELC Toyota DOHC.Toyota number 09248 55040For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.Packaged as shown with pliers and spacer wedge. Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 199

PLUS * Toyota Headbolt Tool
12 Point (Triple Square) Socket.
This item is called XZN (style) and is very hard to find. 1/2 Drive Socket is 100mm long, for easy access to hard to reach headbolts.

read more:

Universal Valve Spring Compressor 68.50
This set is used to remove and install the valve spring
with the cylinder head still on the engine and in the car,
or with the cylinder head removed.
The multi point adjustable base of this tool bolts securely to the headwhile the adjustable lever mechanism pivots from the bar thus compressing the spring.Quick removal and installation of the spring retaining keepers is then easily accomplishedthrough the large openings on both sides of the compression tube.This set comes complete with an easy grip handle and a storage tray.

read more:

13 x 14mm Drain Plug Wrench 72.98
13 x 14mm Drain Plug Wrench.
World Class Hazet Tools Made in Germany!

read more:

2 Piece Set 58.99
Set used for removing/installing lock carrier on hood.
Brand new factory tools Made in Germany.

read more:

2 Pins and 2 Plates 103.00
2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

read more:

22mm Strut O/2 Sensor Socket 18.99
On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

read more:

3 Piece Strut Set 34.99
On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.

read more:

41mm Socket 3/4 Drive 54.99
Hazet 41mm Socket 6 Point 3/4 Drive size with locking Pin.
World Class Hazet Tools Made in Germany!

read more:

5 Pc UpholsterySet 48.00
Upholstery Tool Set
5 Pieces in plastic tray.
Red & black grips.
Set includes one of each large and small "V" notch, and one of each large and small "U" notch, plus one hinge side (hook style)All tools ahve two component handles and Stainless Steel blades.Super High Quality Tools.

read more:

5 Point Star Bit Set 20.00
SECURITY TORX PLUS BIT SET
5 Point Star Security TORX PLUS Insert Bit Set with Mini Ratchet
5 Point set includes sizes TS10, 15, 20, 25, 27, 30, 40
Please note there are 10 total bits and only 7 actual sizes you will get each of the sizes above plus the kit has an extra size 25, 30 and 40 because the 25, 30 and 40 are the popular sizes and tend to wear out (or get lost) faster than the other sizes.
These are Security Torx Plus Tools and they Do NOT work in a standard Torx Fasteners.
Reminder: These are 5 point tools AND THEY ARE TAMPERPROOF VERY RARE AND HARD TO FIND SET!
You will get both the bit set and the mini ratchet with this purchase.

Torx, Torx Plus and Camcar are registered trademarks of Textron, Inc. Torx plus is designed to allow greater torque, and to minimize wear.

read more:

5mm Ball Tip Hex Socket 21.50
5mm Ball Tip Hex Socket 3/8 Drive. Overall Length is 116mm.
Super High Quality Tools Made in Germany!

read more:

Air Bag Tool 0
New Beetle Air Bag Tool
TOOLS USED TO REMOVE AIRBAG ON NEW BEETLE UP TO MODEL YEAR 2000.

read more:

Airbag Adapter 29.95
USED TO PREVENT UNINTENTIONAL TRIGGERING OF SIDE AIRBAGS DURING REMOVAL AND INSTALLATION OF THE DRIVER AND PASSENGER SEATS EXCEPT A8

read more:

Audi Info and Timing 0.00
There are three main Cam bars for timing.
3391, 3243 and T40005
(T40005 is for V 8)
Notice the tool number 3242 this is the T.D.C (TOP DEAD CENTER) Pin
This pin goes with 3391 or 3243.
Type your selection in the search or you can find the tools in this Audi section.
Feel free to call me or email. I will try to assist you.
Please note:
In order to make your selection you must determine if your vehicle is 2 valve per cylinder or 5 valve per cylinder or V8. Example = Notice tool number 3391 says it is for 5 valve. The 3243 is for 2 valve per cylinder.

read more:

Best Quality Thin Wrench Set 68.50
Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

read more:

BigMak Timing Kit 196.00
Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator

read more:

Bonus Torx Set 26.00
Torx Bonus Set Including Screwdriver Set 7 Pc. Sizes included: T8, T10, T15, T20, T25, T27 & T30.
Torx (6 Point) heads used for a wide variety of applications and a wide variety of vehicles. Please note: The screwdrivers are not tamperproof they are standard torx. The folding unit and ratchet at the bottom of the picture are both tamperproof. The Fold up tool has Tamperproof Torx tips. Each torx blade has a hole in the tip = Tamperproof) The sizes are: T9, T10, T15, T20, T25, T27, T30, T40 Some applications include: The T25 for use on E34 E32 E36 E39 E38 (tilt slide sunroof). The T30 is for most BMW with supplemental restraint systems / SRS (BMW REF 002110). The T20 is for some applications on E38 (Diffusion Disc Mount).
Torx Combo Mini Bit and Ratchet SetThe seven bits on the left side of the bit holer are Torx TamperproofPlus this set has 1 and 2 Phillips bits, and a flat head bit.The Tamperproof Torx sizes are: T10, T15, T20, T25, T30, T40for Volkswagen, Audi,Volvo, Mercedes and BMW applications.
You will get all of the tools shown here with this purchase.

read more:

Brake Caliper Tool 110.00
T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Brand New Tool
Made in Germany.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB

read more:

CAM & CRANK TOOLS 127.50
FOR INSTALLATION OF CRANKSHAFT PULLEY INTERMEDIATE SHAFT & CAMSHAFT OIL SEALS.
4 PIECE TOOL SET

read more:

Cam Kit 2 Tools 88.50
New Beetle and T.D.I. Cam Kit Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.This two piece lock plate and alignment pin allows the technician for factory correctand trouble free installations Reference: 3418 and 3359.

read more:

Camshaft Locating Fixtures 150.00
Timing tools sold as a set (2) pieces.
Camshaft positioners, number 3341 especially for Audi A8.

read more:

Chain Adjuster 24.50
3366CHAIN ADJUSTER Required to change the troublesome cam adjuster seal
Audi and Volkswagen 4, 6 (2.7 and 2.8) and 8 CylWith 5 Valve per Cyl.
Also Audi VW 1.8 Golf Jetta Passat New Beetle
Note:The manual says to remove both camshafts to change the seal ...
but using this tool you can relieve the tension on the camshaft chainand lift it up far enough to clean, remove and replace the gasket and seal.
This procedure not only saves time but saves any other damagethat may happen to camshafts and bearings by removing them.
ORIGINAL MATRA FACTORY TOOL MADE IN GERMANY

read more:

CIS Injector Puller 9.99
Number 1123/4CIS Injector Puller tool used to easily remove CIS fuel injectors on many in line engines.In operation, this tool fits around the injector base and with a screwdriver(used as a lever put into the slots of the tool)simply "POP" the injector out, without damage to the injector hose.Applications include: All Gas Water Cooled Volkswagen,Porsche 924 and Audi 4000, 5000 with mechanical fuel injectors.
High quality Cis and Cis E fuel injector puller tool This is by far one of the more useful tools in the shop. If you have ever attempted the "two screwdriver technique" you will know it can be tricky. Injectors are proned to rusting when they have been in the head for a long period of time, they become lodged in there and are next to impossible to wiggle out without damaging expensive lines. This tool made of high tensile strength steel and hooks around the base of the injector; where they are intended to be pulled from.

read more:

Cylinder Head Tools 23.50
Cylinder Head Alignment Kit VA6000 Like Volkswagen Tool 3070 Set comes with (2) pairs of guide pins, 11X1.75mm and 12X1.75mm.VW model Scirocco, Rabbit, Dasher, Fox. Audi model 4000, 5000

read more:

Dial Indicator and Holder 98.50
Bosch Diesel Injection Pump
Timing Indicator Tools.
With High Quality Dial Indicator Made in Germany!
You will not find this price anywhere except Zdmak!
Tools are used for the accurate setting of
the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This set comes complete with the correct tools for the job!
Contents: Metric Dial Indicator Made in Germany,
plus holder plus the 10cm dial indicator extension pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.
For use on VW and Audi diesels.
Also works with 1981 1986 Volvo 6 cyl 2.4L diesels,
1989 1994 Dodge 6 cyl 5.9L diesels.

FYI FOR PEOPLE WHO DECIDE "NOT" TO USE THIS SET
Here is some helpful info...Universal conversion factor for milimeters into decimal inches is .03937
EXAMPLE: 13mm X .03937= .5118"

read more:

Duckwear Tool Roll 19.99
Bucket Boss Brand Duckwear Tool Roll Rolls up to store easily in small places Divided pockets organize and protect wrench sets, screwdrivers, tire gauges and more. Socket strip holds 3/8 inch or 1/4 inch sockets. Product Description From the Manufacturer:A clever self contained design with 23 pockets for wrenches, ratches and automotive hand tools. Equipped with socket clips that hold 3/8 inch and 1/4 inch sockets. Entire unit rolls up and secures with two barrel locks and a carry handle for transport. For the house, truck, boat and shop. Heavy duty and much better than a small bulky tool box. The open end of the tool slots face to the inside so wrenches and screwdrivers dont fall out when it is rolled up. The draw strings on each end are a heavy elastic with a quick tie so the whole thing stays together.

read more:

Extra Long T30 & T40 Torx Set 27.50
Extra Long T30 & T40 Torx Set. Overall length of each tool is 8 inches. You get both tools with this purchase.

read more:

Factory Tool 3417 29.50
Item Number 3417 Original Oil service Wrench 74mm with14 Points (inside flats flutes).
Applications include: Audi, VW Golf, and new body Jetta, TDI (Diesel)
and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0litre,
Rabbit, Dasher, Scirocco, and New Beetle.
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

read more:

Front Crankshaft Pulley Set 187.50
Crank shaft pulley Set of 2 tools:VW 2084 & 2079Counter Holder 2084needed for R&R of front crank shaft pulley. ApplicaTIONS for 2084: VW/Audi models with 5 cylinder engines 80, 90, Quattro, 4000, 5000, Quantum.Used in conjunction with Extension Wrench 2079 BELOW. PLUS: 2079 Extension Wrench needed for R&R of front crank shaft bolt.ApplicablE: VW/Audi models with 5 cylinder engines80, 90, Quattro, 4000, 5000, Quantum.

read more:

Hazet Deep Offset 8 Pc Metric Set 169.50
This is an eight piece Deep Offset Wrench set Double Box wrenches with 12 points.Sizes: 6x7mm, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 and 21x22mm.
Super High Quality Tools Made in Germany by Hazet!<

read more:


You Searched for

beetle radio removal tools

Click beetle radio removal tools to go to Radio Removal Tools
SEARCH RSS NEWS USING THE WORDS BELOW

beetle radio removal tools | new beetle radio removal tools | radio removal tool | radio removal tools | bmw radio removal tool | vw radio removal tool | audi radio removal tool | porsche radio removal tool | mercedes radio removal tool | volkswagen radio removal tool | ford radio removal tool | radio tool | radio tools | bmw radio tools | vw radio tools | audi radio tools | volkswagen radio tools | mercedes radio tools | porsche radio tools | ford radio tools | golf radio tool | jetta radio tools | beetle radio tools | a4 radio tools | a6 radio tools | bmw radio tool | vw radio tool | audi radio tool | volkswagen radio tool | porsche radio tool | mercedes radio tool | bmw radio removal tools | vw radio removal tools | audi radio removal tools | mercedes radio removal tools | porsche radio removal tools | golf radio removal tools | jetta adio removal tools | beetle radio removal tools |


Spider Loop web marketing internet marketing search engine optimization search engine placement search engine listings google page rank yahoo serp



Web Design Hosting and internet marketing by MMK Technologies

(c) Copyright 2005 Radio Removal Tools.